FAQs

HOW DOES RESCUE TAPE WORK?

Rescue Tape is a self-fusing tape. Ingredients in the silicone cause it to permanently bond to itself when stretched or forced together.

HOW LONG DOES RESCUE TAPE TAKE TO FUSE TOGETHER?

The tighter you stretch Rescue Tape, the quicker it bonds. In most cases, Rescue Tape bonds in just seconds and takes just a minute or two to become permanent. Because of our high quality control and superior ingredients, Rescue Tape is the fastest bonding self-fusing silicone on the market today.

WHAT IS THE SHELF LIFE? HOW DO I STORE RESCUE TAPE?

For the longest shelf life, it should be kept at room temperature and away from direct light or heat. However, these factors only slightly alter the shelf life. Even when stored improperly, Rescue Tape should last for many years. Our customers have reported that our self-fusing silicone kept for decades will still work extremely well!

HOW MUCH RESCUE TAPE SHOULD I USE?

When overlapping Rescue Tape by one-half as directed, you will automatically be left with a “double wrap.” This is sufficient for most weatherproofing applications such as electrical wiring. However, when sealing leaks, the more you use, the stronger the seal will be. Typically 3 to 5 layers thick and 3 to 5 inches to both sides of a damaged hose should repair most leaks. Additional layers may be necessary.

DOES RESCUE TAPE NEED TO BE APPLIED TO A CLEAN SURFACE?

No. Rescue Tape does not stick to the surface of a project, and therefore it does not matter whether the surface is clean or dirty. As long as you can overlap Rescue Tape onto itself, it will work, even if the surface is wet, dirty, or oily. You should avoid getting dirt or oil between the layers, however, as this will interfere with the bonding surface.

WHAT SIDE OF THE TAPE DO I USE?

Rescue Tape works on either side. Simply remove the mylar backing as you go along.

DO I HAVE TO WORRY ABOUT RESCUE TAPE BECOMING UNRAVELED?

HOW DO I REMOVE RESCUE TAPE?